The Process Of Light Guide Plates Manufacturing

The Process Of Light Guide Plates Manufacturing 

In order to understand the light guide plates manufacturing process, we should acquaint the parts and materials which are necessary for the light guide plate in advance.

1, the necessary materials and tools

a. Injection molding: Optical PMMA particles, ink

b. Cutting forming: optical PMMA plates, inks

2, optical PMMA particles and plates:

No matter what kind of manufacturing plan is proceeded to produce the light guide plate, the most important and original material is optical PMMA (POLYMETHYL METHACRYLATE) which also is known as acrylic or plexiglass.  And it can be divided into PMMA particles and PMMA plates.  The MMA monomers which are extracted from petroleum have been chemically processed to make optical PMMA particles. The optical PMMA particles which can be used by injection molding have been made into optical PMMA plates by method Casting or Injection.  There are some famous PMMA manufacturers, such as: (Japan) Mitsubishi Rayon, (Japan) Sumitomo Chemical Sumitomo, (Japan) Asahicasei, (Japan) Kula Lei Kuraray, (Taiwan) Chi Mei chemical, (Korea) World and Sehwa.

3, Ink: It is divided into ultraviolet (UV) and infrared (IR).

4, There are three main steps of cutting the light guide plate.

Step one:  polish the luminous surface of the acrylic plate and then cut the acrylic plate into the form that we need.

Step two:  make the light guide lattice points according the design.

Step three:  clean the acrylic plate and then print the light guide point on it with light guide point plate.  Finally, it has been dry by infrared or ultraviolet.

5, Injection molding light guide plate is divided into printed light guide plate and non-printed light guide plate, which is basically the same process as in the casting mold.  Non-printed light guide plate is that light guide points which have been designed are cast in the mold, and both light guide points and light guide plate are done at the end of injecting mold process. Printed light guide plate is that light guide points are printed after the acrylic plate has been injected.

Here, we see some photos in our factory.

These are the original acrylic plates which are very large about 3.5*1.5 meter.  The common specifications of the thickness are 1.0 mm, 1.5 mm, 2.0 mm, 2.5 mm,3.0 mm, 3.5 mm, 4.0mm, 5.0mm.
The process of light guide plates manufacturing4

This is our new cutting forming machine for acrylic plates.

The process of light guide plates manufacturing2

This is a front view picture of cutting forming machine working.
The process of light guide plates manufacturing3

This is a side view picture of cutting forming machine working.
The process of light guide plates manufacturing1
The light guide lattice points we design for the acrylic plates are carved into this transparent plate. And then light guide lattice points are printed on the surface of acrylic plates by silk-screen printing.
The process of light guide plates manufacturing5

We often hear from our customers complaining about why I should need a dedicated plastic mold for my LED backlight.  The dedicated light guide plate mold alone at least costs one thousand dollar. In fact, it is quite necessary. It not only can make light guide plates into irregular shapes and keep the shape the same from beginning to the end, but also increase the light transmittance and enhance the brightness.

We can see there are some dedicated light guide plate molds in the photo.  In fact, they are made of steel and very heavy. I have tried to lift one up, but can’t succeed.
The process of light guide plates manufacturing6

This is an injection molding light guide plate machine which  is pretty huge and has a very high working efficiency.
The process of light guide plates manufacturing7

 

You may be interested in these articles:

Fill out my online form.